Single-line Parallel Injectors

Single-line Parallel Systems can service one machine, different zones on one machine or even several separate machines. Regardless of the application, the principle of centralized lubrication remains the same: a central pump station automatically delivers lubricant through a single supply line to the injectors. Each injector serves only one lubrication point and may be accurately adjusted to deliver the precise amount of grease or oil required.

Systems are easy to understand, install and maintain. You realize savings right from the start because one lubricant supply line means lower installation costs.  Injector systems dispense either grease or oil in measured quantities, unaffected by normal temperature or viscosity changes.

For large systems, LubriSource’s single-line design and powerful pumps mean injectors can be located long distances from original refinery containers or bulk lubricant tanks. Lubricant injectors are externally adjustable without special tools so each bearing can receive the correct amount of lubricant. No under- or over-lubrication at individual points. Each injector incorporates an indicator pin that gives visual confirmation the injector is operating correctly.

When necessary, troubleshooting is the simple process of checking indicator pins. When injectors initially need service, the job is quick and easy. No need to remove supply line connections or disturb adjacent injectors. Replacement can usually be done between lubrication cycles, so there’s almost no lubricant loss or downtime.

LubriSource is your qualified factory authorized distributor to provide design engineering, startup help and training for your personnel in the use and maintenance of injector systems.

Safeguard Your Equipment Against Breakdowns

LubriSource provides products that reduce the risk of wear and equipment failure.

GET STARTED